新闻资讯

首页>>新闻资讯 >

加长臂挖掘机的应用领域有哪些?

日期:2019-06-11   来源:/
  关于延长的手臂,我相信很多机械行业的朋友都不陌生,在市政建设、地铁交通的改善,污水重建,河清理等等都需要大量的工程机械和设备、矿山机械专业工程的标准工作时,不应完成,所以延长臂挖掘机使用超长动臂和超级长臂来显示他们可以在疏浚,护岸,斜率,而地铁建设受地面环境条件等制约,发挥着巨大的作用。
  As for the extended arm, I believe that many friends in the mechanical industry are familiar with it. Municipal construction, improvement of subway traffic, sewage reconstruction, river cleaning and so on require a lot of construction machinery and equipment, and standard work of mine machinery professional engineering should not be completed. So the extended arm excavator uses super-long arm and super-long arm to show that they can dredge, revetment, slope, and subway. Constrained by the surface environment conditions, construction plays a huge role.
  常见的应用包括:
  Common applications include:
  1. 双节的延伸臂:它有一个相对大范围的使用,但它的主要功能是提高开挖半径,如清理河水,复垦的大海,开挖地铁入口和出口,行人隧道,修复的公路防护墙,住宅和一般运输水泥。还有人用他的前锤把房子砸坏,但更危险。一般情况下,两段式伸缩臂在10-26米的区间有较多的变化。
  1. Double-section extension arm: It has a relatively wide range of use, but its main function is to increase the excavation radius, such as clearing rivers, reclaiming the sea, excavating subway entrances and exits, pedestrian tunnels, repaired highway protective walls, residential buildings and general transportation cement. Others smashed the house with his hammer, but it was more dangerous. Generally speaking, the two-stage telescopic boom has more changes in the range of 10-26 meters.
  2. 三段加长臂:或多段加长臂,主要用于高层建筑的拆除,前置破碎锤或液压钳。更多用户在20-28米内。
  2. Three-section elongated arm: or multi-section elongated arm, mainly used for the demolition of high-rise buildings, front crushing hammer or hydraulic clamp. More users within 20-28 meters.
  3.滑臂或内伸缩式臂:主要用于回转半径小、掘进深度要求高的工况,通常采用堆焊式挖壳斗(壳斗)。滑动臂的最大垂直挖深一般为10米,伸缩臂的垂直挖深一般小于26米。
  3. Sliding arm or inner telescopic arm: mainly used for small turning radius and high excavation depth requirements, usually using surfacing shell bucket (shell bucket). The maximum vertical excavation depth of the sliding arm is generally 10 meters, and the vertical excavation depth of the telescopic arm is generally less than 26 meters.
加长臂挖掘机出租
  4. 打桩机伸臂:大前臂直,前肘臂约2.6m(主要用于与振动锤连接,安装阀块和管道),振动锤用于修建公路、铁路或埋管时拉钢板桩。
  4. Pile Driver Extension: Large forearm straight, forearm about 2.6m (mainly used to connect with vibration hammer, install valve blocks and pipelines), vibration hammer used to build roads, railways or buried pipes when pulling steel sheet piles.
  5. 抓木机和运煤机加长臂:大部分时间用于火车或汽车的装卸,一般臂长7.6米,前臂长5-6米。
  5. Wood grabber and coal conveyor lengthening arm: most of the time used for loading and unloading of trains or cars, the arm length is 7.6 meters, the forearm length is 5-6 meters.
  对老式挖掘机的标准臂进行修改,加长了挖掘机的臂,首先要测量挖掘机的性能,如液压输出是否达到一定的压力;行走机构和回转板结构是否能承载挖掘机伸出的臂,伸出的臂能承载多长时间?
  To modify the standard arm of the old excavator and lengthen the arm of the excavator, the first thing is to measure the performance of the excavator, such as whether the hydraulic output reaches a certain pressure, whether the walking mechanism and the rotary plate structure can carry the arm extended by the excavator, and how long can the arm extended carry?
  旧挖掘机的使用寿命和施工作业的长度直接影响到挖掘机本身的性能,如无挖土力、臂举力弱、行走缓慢等。由于这些原因,长臂挖掘机的工作效率难以充分发挥。
  The service life of the old excavator and the length of construction directly affect the performance of the excavator itself, such as no excavation force, weak arm lift, slow walking, etc. Because of these reasons, the working efficiency of long arm excavator is difficult to give full play to.
  改造前最好对挖掘机进行质量检验。只有通过质量检验,才能更好地了解挖掘机的性能,选择更合适的加长臂进行改造。
  It is better to inspect the quality of excavators before transformation. Only through quality inspection, can we better understand the performance of excavator and select a more suitable extension arm for transformation.

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】